Manual Receiving Station Selection (Manual Mode Setting) - JRC NCR-333 Instruction Manual

6.3.1.4 Manual receiving station selection (MANUAL MODE SETTING)

To display MANUAL MODE SETTING screen, select
(6.3.5).
Select the receiving station of each channel. There is no setup of NAVAREA.
Fig.6-8 The receiving station selection screen (Manual mode setting)
The items of the receiving station selection screen (manual mode) are as follows;
- FREQUENCY:
- SELECT ALL:
- Receiving station A – Z: Select receiving stations from A to Z
Notes
When this screen is displayed, the receiving station of RX1 is displayed first.
a. Select receiving stations
Start with selection of "FREQUENCY".
Carry out the procedure from section 3) to 5) of p.6-28 "a. Select receiving stations"
b. Cancel settings
Carry out "b. Cancel settings" of p.6-29.
c. Set up the next channel
Carry out the procedure from section 1) to 3) of p.6-29 "c. Set up the next channel (or NAVAREA)".
d. Save (or Clear) settings
Carry out the procedure from section 1) to 4) of p.6-30 "d. Save (or Clear) settings".
6-32
STATION(MANUAL)
FREQUENCY:RX1(518K)
SELECT ALL
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
M:
Select the channel (RX1 (518k), RX2 (490k), RX3 (4209.5k)).
Select all the stations from A to Z.
: A message is received.
: A message is not received.
4.MANUAL MODE SETTING
N:
O:
P:
Q:
R:
S:
T:
U:
V:
W:
X:
Y:
Z:
from RX STATION menu
ⅩⅠ