JRC NCR-333 Instruction Manual page 75

6.3.4.6 External equipment message output settings (INS MSG OUTPUT SETTING)
lNS port (DATA OUT) message output conditions can be set up when connecting external equipment.
INS MSG OUTPUT SETTING
STATION
518k: AB-DEFGHIJKLMNOPQRSTUVWXYZ
490k: A-CDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: -BCDEFGHIJKLMNOPQRSTUVWXYZ
MSG TYPE
518k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: ABCDEFGHIJKLMNOPQRSTUVWXYZ
The items of the station and message type selection screen are followings;
- Station A to Z and message type A to Z of outputted messages via INS port.
"SELECT ALL"
"A" to "Z" display
"–" display
Notes
Navigational warning [A], Meteorological warning [B], Search and rescue information/piracy and armed
robbery [D], Navigational warning (additional) [L] are obliged to receive a message. These message
types setting cannot be changed.
a. Select stations and message type
Press the ▲ ▼
- Pressing the ENT key switches alternately between "(A-Z) " and "– ".
- Select the "SELECT ALL" and press the ENT key, settings changes to all.
b. Cancel settings
When the CLR/ MENU/ DISP/ USER key is pressed while setting up "a. Select receiving stations and
message type", the information screen (the sub screen) as shown in the following figure is displayed.
Select "OK" or "CANCEL".
OK: Canceling the receiving station settings, and the screen changes according to the
pressed key.
CANCEL: The information screen is closed. Continue the station and message type settings.
SELECT ALL
SELECT ALL
: Select all the station or msg type from A to Z.
: Messages are outputted via INS port.
: Messages are not outputted via INS port.
key to select station and messge type for setting.
*INS MSG SET*
EXIT WITHOUT
ARE YOU SURE?
(SAVE:PRESS '*' KEY)
[OK] [[CANCEL]
SAVING.
ⅤⅢ
6-43