Resetting The Vc6000 Series; Function Keys - Motorola VC6000 Series Product Reference Manual

1 - 10 VC6000 Series Product Reference Guide

Resetting the VC6000 Series

If the VC6000 Series stops responding to inputs, perform the reset actions in the following order:
Warm Boot
Warm boot may become necessary when an application running on your VC6000 Series does not respond after
performing initial reset.
CAUTION
To perform warm boot:
Press and hold the Power Button
Cold Boot
Cold boot may become necessary when your VC6000 Series is jammed and does not respond after performing
warm boot.
Cold boot restarts the VC6000 Series by performing an ungraceful shutdown of all running applications and
powering off the VC6000 Series. Cold boot resets information stored in all running applications. Data saved
on flash memory or a memory card is not lost.
To perform a cold boot:
Press and hold
You can also perform cold boot by holding the Power Button
Clean Boot
CAUTION A clean boot should only be performed by an authorized system administrator. Removing power from
the VC6000 during a clean boot may render the VC6000 inoperable.
Clean boot may become necessary when your VC6000 Series is jammed and does not respond to cold boot.
A clean boot resets the VC6000 Series to the factory default settings. All applications installed by your organization
are erased and should be re-installed on the VC6000 Series.
To perform a clean boot:
Press and hold
and the splash screen is visible.

Function Keys

The five function keys on the front right hand side of the panel can be set to perform dedicated functions, such
switching between different software application screens. To know more about the function of each key, refer to
your enterprise application guide. To program the operation of the Function keys, refer to the VC6000 Series
Software Enterprise Mobility Developer Kit for C (EMDK).
Warm boot may cause lost of information from programs currently running on the computer.
for five seconds and release.
+ + Power Button
+ + Suspend Button
.
pressed for 25 seconds.
+ Left Soft Key . The VC6000 Series starts to boot