Vivotek VS8801 User Manual page 95

■ Capacity: You can select either the entire storage space available or specify a reserved space. The
recording size limit must be larger than the reserved space for cyclic recording. The reserved space is
used for cyclic recording to prevent malfunctions that might occur during the transaction stage when
the video feeds are about to fill up the storage space. This value must be larger than 15 MBytes.
■ File name prefix: Enter the text that will be appended to the front of the file name.
■ Enable cyclic recording: If your check this item, when the maximum capacity is reached, the oldest file
will be overwritten by the latest ones.
If you want to enable recording notification, please refer to Event > Event Settings on page 79 for more
details.
When completed, select Enable this recording. Click Save to enable the setting and click Close to
exit. When the system begins recording, it will send the recorded files to the networked storage or SD
card. The new recording configuration will appear on the recording page as shown below. To move a
configured setting, click on the Delete button.
Below are legends on the Recording Settings page:
Name: Click to open and edit an existing configuration.
ON (Status): Click to enable or disable the recording task.
NAS or SD: Click to open the file list produced by the recording tasks. For more information about folder
naming, please refer to page 90 for details. A file list window will prompt showing previously recorded
files.
VIVOTEK
User's Manual - 95