Vivotek VS8801 User Manual page 79

VIVOTEK
Event settings
In the Event settings column, click Add to open the Event settings page. On this page, you can
arrange three elements -- Trigger, Schedule, and Action to set an event. A total of 3 event settings can be
configured.
Event name: Enter a name for the event setting.
Enable this event: Select this option to enable the event setting.
Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher priority
setting will be executed first.
Detect next event after seconds: Enter the duration in seconds to pause motion detection after a
motion is detected.
An event is an action initiated by a user-defined trigger source; it is the causal arrangement of the
following three elements: Trigger, Event Schedule, and Action.
Trigger
This is the cause or stimulus which defines when to trigger the video server. The trigger source can be
configured to use the video server's built-in motion detection mechanism or external digital input devices.
There are several choices of trigger sources as shown below. Select the item to display the detailed
configuration options.
User's Manual - 79