Vivotek VS8801 User Manual page 214

VIVOTEK
uart
cameraid
hometype
isptz
disablemdonptz
patrolseq
patroldwelling
7.20 UART control
Group: uart (capability.nuart > 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
214 - User's Manual
0 ~ (m-1), m 0
is UART
count
0~255 1
<boolean> 0
0 ~ 2 0
<boolean> 0
string[120] <blank>
string[160] <blank>
VALUE DEFAULT
string[40] <blank>
string[128] <blank>
<boolean> 0
(capability.nuart > 0)
URL Command Document for VS8801-VVTK
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling external
PTZ camera.
1/4 The attribute defines whether the
HOME command emulation is
enabled.
0: Use the preset position 0 as the
home position
1: Use HOME command (if the
camera supports it.)
1/4 0: disable PTZ commands.
1: enable PTZ commands with
PTZ driver.
2: enable PTZ commands with
UART tunnel.
1/4 Disable motion detection on PTZ
operation.
1/4 (For external device)
The indexes of patrol points,
separated by ","
1/4 (For external device)
The dwelling time of each patrol
point, separated by ","
SECURITY DESCRIPTION
(get/set)
1/4 Name of the PTZ driver.
1/4 Full path of the PTZ driver.
4/4 Enable HTTP tunnel channel to
control UART.
41