Vivotek VS8801 User Manual page 225

time
7.26 Event setting
Group: event_i<0~2>
PARAMETER
name
enable
priority
delay
trigger
triggerstatus
di
vi
string[17] NULL
VALUE Default
string[40] NULL
0, 1 0
0, 1, 2 1
1~999 20
boot, boot
di,
motion,
seq,
tampering,
visignal,
virestore,
vi
<string> trigger
<integer> 0
<integer> 0
URL Command Document for VS8801-VVTK
6/7 Time of custom script.
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the
next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"tampering" = Tamper detection.
"visignal" = Video input signal loss.
"virestore" = Video input signal
restore
"vi"= Virtual input (Manual trigger)
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger
condition is "di".
One bit represents one digital input.
The LSB indicates DI 0.
6/6 Indicate the source id of vi trigger.
This field is required when trigger
condition is "vi".
One bit represents one digital input.
The LSB indicates VI 0.
52
VIVOTEK
User's Manual - 225