Vivotek VS8801 User Manual page 135

brightnesspercent 0 ~ 100
saturationpercent 0 ~ 100
contrastpercent 0 ~ 100
sharpnesspercent 0~100
xoffset -4 ~ 4
yoffset -4 ~ 4
deinterlace_enable <boolean>
deinterlace_mode adaptive,
blend
IBPE_edgeenable <boolean>
IBPE_edgestrength 1 ~ 128
IBPE_nrenable <boolean>
IBPE_nrmode 1 ~ 3
IBPE_nrstrength 1 ~ 63
*Note: Saving value between -5~+5 to "
automatically, and then the value of
Saving value to "
saturation", "contrast", or "sharpness" has the same behavior.
URL Command Document for VS8401-VVTK
50 4/4
50 4/4
50 4/4
30 4/4
2 4/4
2 4/4
1 4/4
adaptive 4/4
0 4/4
14 4/4
0 4/4
1 4/4
1 4/4
brightness" will save its corresponding value to "brightnesspercent"
"
brightness" will be set back to 100 to take effect..
36
changing to use
"sharpnesspercent".
Adjust brightness of image by
percentage.
Darker 0 <-> 100 Brighter
Adjust saturation of image by
percentage.
Less 0 <-> 100 More saturation
Adjust contrast of image by
percentage.
Less 0 <-> 100 More contrast
Adjust sharpness of image by
percentage.
Softer 0 <-> 100 Sharper
Change start point of input image
in horizontal.
Change start point of input image
in vertical.
Enable de-interlace
Adaptive: Detect moving area and
perform de-interlace on it. This
mode leads to better image quality,
but consumes more resource.
Blend: Use blend method to
perform de-interlace.
Enable edge enhancement.
Adjust edge enhancement strength.
1 is minimum and 128 is
maximum.
Enable noise reduction.
Adjust noise reduction mode.
1 => DeGaussian
2 => DeImpulse
3 => DeGaussian + DeImpulse
Adjust noise reduction strength. 1
is minimum and 63 is maximum.
User's Manual - 135
VIVOTEK