Table of Contents
Advertisement
•
Set Second Fixed Length — use this label to instruct the scanner that
the next two programming labels you scan will define the second fixed label
length. Again, this setting can be any number of digits between 04 and 50
1
digits
(including check character).
•
No Second Fixed Length — scan this label after setting the first fixed
length to instruct the scanner to recognize only the label length chosen as
the first fixed length.
Check Digit and Variable Length Label Selections
These programming labels determine whether you compute and send the check digit
contents.
If you want to set the scanner to read only fixed length labels, follow the procedures
on the pages immediately following.
SET --------------------------------------------------
C
OMPUTE
T
RANSMIT
D
ISABLE
1
The scanner will decode up to 50 characters, but the actual length read will vary
depending upon bar code size and quality. The IBM POS interface is limited to 32
character labels.
R44-2018
---------------------
---------------------
-----------------------
----------------------------------------------- END
-------- D
'
ON
T COMPUTE
-------- D
'
ON
T TRANSMIT
-------- E
NABLE
67
Advertisement
Table of Contents
