Table of Contents
Advertisement
PC Keyboard Wedge – Connect to a Laptop/
No Keyboard Attached
If no keyboard is attached, the scanner must provide the acknowledge signal to the
PC. In this case, enable the "Laptop/No External Keyboard" mode. If a keyboard is
attached, enable "Keyboard Attached".
Laptop (integrated keyboard) — scan the "Laptop/No External Keyboard" label
below when the scanner is connected to a laptop computer or when the scanner is
operated with no external keyboard attached.
PC (external keyboard) — if you move the scanner to a standard PC, change the
setting to "Keyboard Attached".
Send Control Characters — when this feature is disabled, all ASCII characters
except NUL (00h) are transmitted. Enabling this feature limits transmission of
ASCII characters to the following:
•
Only ASCII characters between 20h..127h, plus...
- Carriage Return (CR=0Dh)
- BackSpace (BS=08h)
- Right Tab (HT=09h)
- Left Tab (0Bh)
- Esc (1Bh)
SET --------------------------------------------------
K
EYBOARD
D
ISABLE
R44-2018
A
--------
TTACHED
-----------------------
----------------------------------------------- END
L
/N
E
APTOP
O
XTERNAL
------------ E
NABLE
K
EYBOARD
23
Advertisement
Table of Contents
