Error (Hard Lockout) Mode - Prestige Solo 110 Installation And Maintenance Manual

Start-Up Procedures

Error (Hard Lockout) Mode

If a system fault occurs while the boiler is run-
ning, the system goes into lockout and the dis-
play starts to flash with the first digit as an E
and the next two digits give the code for this
fault.
For a detailed description of the error codes, ref-
erence the PRESTIGE Troubleshooting Guide.
CAUTION
The boiler freeze protection feature is
disabled during a Hard Lockout.
WARNING
During a hard lockout or low water con-
dition the boiler will not re-start with
our service. If the heating system is left
unattended in cold weather appropriate
safeguards or alarms should be installed
to prevent property damage.
46