Internal Wiring
SECTION VII - Internal Wiring
WARNING
ELECTRICAL SHOCK HAZARD. For
your safety, disconnect electrical power
supply to the unit before servicing or
making any electrical connections to
avoid possible electric shock hazard.
Failure to do so can cause severe person-
al injury or death.
CAUTION
Prior to servicing, label all wires prior to
disconnection. Wiring errors can cause
i m p ro p e r and dangerous operation.
Verify proper operation after servicing.
General Requirements
-
Wiring must be N.E.C Class 1.
-
If original wiring as supplied with the unit
must be replaced, use only Type T 90ºC
wire or equivalent as a minimum.
-
The PRESTIGE
grounded as required by National Electrical
Code ANSI/NFPA 70 - latest edition and /
or the Canadian Electrical Code Part 1,
CSA C22.1, Electrical Code.
29
must be electrically