AMX NXA-ENET8-2POE Operation/Reference Manual page 66

Configuring the NXA-ENET8-2POE
FIG. 44 SNMP System Configuration
SNMP System Configuration parameters
SNMP System Configuration
• Mode
• Version
• Read Community
• Write Community
• Engine ID
56
Enables or disables SNMP service. (Default: Disabled)
Specifies the SNMP version to use. (Options: SNMP v1, SNMP v2c, SNMP v3;
Default: SNMP v2c)
The community used for read-only access to the SNMP agent. (Range: 0-255
characters, ASCII characters 33-126 only; Default: public).
This parameter only applies to SNMPv1 and SNMPv2c. SNMPv3 uses the User-
based Security Model (USM) for authentication and privacy.
This community string is associated with SNMPv1 or SNMPv2 clients in the
SNMPv3 Communities table (see Setting SNMPV3 Community Access
Strings section on page 58).
The community used for read/write access to the SNMP agent. (Range: 0-255
characters, ASCII characters 33-126 only; Default: private)
This parameter only applies to SNMPv1 and SNMPv2c. SNMPv3 uses the User-
based Security Model (USM) for authentication and privacy.
This community string is associated with SNMPv1 or SNMPv2 clients in the
SNMPv3 Communities table (see Setting SNMPV3 Community Access
Strings section on page 58).
The SNMPv3 engine ID. (Range: 10-64 hex digits, excluding a string of all 0's or
all F's; Default: 800007e5017f000001)
An SNMPv3 engine is an independent SNMP agent that resides on the switch.
This engine protects against message replay, delay, and redirection. The engine
ID is also used in combination with user passwords to generate the security keys
for authenticating and encrypting SNMPv3 packets.
A local engine ID is automatically generated that is unique to the switch. This is
referred to as the default engine ID. If the local engine ID is deleted or changed,
all local SNMP users will be cleared. You will need to reconfigure all existing
users.
NXA-ENET8-2POE Gigabit Ethernet Layer 2 PoE Switch