Group Paging Mode; Sending And Receiving Pages - Polycom SoundStation Duo Installation Instructions And User Manual

Polycom® SoundStation® Duo Conference Phone User Guide

Group Paging Mode

100
Press the Ok soft key
4
Allowing PTT Broadcasts to Play During Active Calls
The Accept While Busy option allows PTT broadcasts to arrive as active calls
(if enabled) or held calls (if disabled).
If enabled, a PTT broadcast will interrupt telephone calls and you'll hear the
audio of both the telephone call and the PTT broadcast. The party on the other
end of the telephone call cannot hear the PTT broadcast unless that party has
also enabled Accept While Busy.
If disabled, PTT broadcasts are held during an active call. To hear the
broadcast, you have to resume the broadcast.
To allow or disallow PTT broadcasts to play during an active call:
Press , and then select Settings > Basic > Preferences >
1
Paging/PTT Configuration > PTT Push To Talk.
From the PTT Channel Configuration screen, scroll to
2
Accept While Busy, and enable or disable the setting.
The default setting is Disabled. When enabled, your phone will accept
and play broadcasts while you're in an active call. When disabled, your
phone won't play broadcasts while you're in a call, but will place them in
a 'pending' state instead.
Press the Ok soft key.
3
Your phone may be enabled to operate in a broadcast mode called
Group Paging mode. In this mode, you broadcast one-way announcements to
a specified group of phones, called a Paging Group. In Group Paging mode,
users must subscribe to Paging Groups to send and receive pages.

Sending and Receiving Pages

To send and receive pages, you need to subscribe to certain Paging Groups. By
default, you're subscribed to Paging Groups 1, 24, and 25. This means that:
• You can send pages to Paging Groups 1, 24, and 25.
• You'll receive pages sent to Paging Groups 1, 24, and 25.
Sending Pages
By default, when you send a group page, it's automatically sent to
Paging Group 1. This is your default paging group.