Konica Minolta bizhub 751 Quick Manual page 68

Basic operations
2
Select the destination.
– If fax numbers are already registered, a registered destination can be selected. For details on
registering destinations, refer to page 4-2 of this manual.
– When directly entering the fax number, use the keypad to type in the number.
– A document can be sent to multiple destinations at the same time (Broadcast transmission). For
details on sending a document to multiple destinations, refer to page 4-9 of this manual.
– If necessary, touch [Scan Settings], [Original Settings] or [Comm. Settings], and specify the desired
settings. For details, refer to chapter 4, "Transmitting data", of the User's Guide [Network
Scan/Fax/Network Fax Operations].
3
Position the original to be faxed.
– To send a original that cannot be loaded into the ADF (a thick original or an original on thin paper),
position it on the original glass.
– Position the original face up in the ADF with the top edge of the original inserted into the feed slot.
751/601
1
1-11