Konica Minolta bizhub 751 Quick Manual page 56

No. Part name
6 Hard Disk HD-510
7 Output Tray OT-505
8 Shift Tray SF-602
9 Z Folding Unit ZU-605
10 Post Inserter PI-504
11 Finisher FS-610
12 Punch Kit PK-505
13 Finisher FS-525
14 Finisher FS-524
15 Image Controller IC-208
16 Fax Kit FK-502
17 Mount Kit MK-716
18 Authentication Unit (biomet-
ric type) AU-101
19 Authentication Unit (IC card
type) AU-201
20 Working Table WT-504
21 Key Counter Socket
22 Key Counter
Note
For details, refer to chapter 1, "Before making copies", of the User's Guide [Copy Operations].
751/601
Description
Installed to increase the scanning capacity or enabling scanning of multiple
jobs.
Collects printed sheets.
Separates copies fed out at an offset.
Installed with the finisher to enable Z-folding and hole punching.
Installed with the finisher to enable insertion of the cover sheet into the printed
sheets. In addition, you can operate the finisher manually.
Collects printed sheets. Provides selectable finishing functions: sort, group,
offset-sort, offset-group, staple, face up, center staple & fold, half-fold, and tri-
fold.
Installed with the finisher to enable hole punching.
Collects printed sheets. Provides selectable finishing functions: sort, group,
offset-sort, offset-group, face up, and staple.
Collects printed sheets. Provides selectable finishing functions: sort, group,
offset-sort, offset-group, face up, and staple.
Installed when this machine is used for network printing and network scan-
ning.
Allows this machine to be used as a fax machine.
Used to install the Fax kit.
Scans vein patterns in the finger to verify user authentication.
Reads the information stored on an IC card to verify user authentication.
Provides an area to temporarily place originals and other materials. This is also
used when the authentication unit is installed.
Required for installing the key counter.
Installed onto this machine to make the counter function available for printed
sheets.
x-55