Use
Operation
20
This ceramic cooktop is equipped with electronic sensor
switches which react to finger contact.
To operate a cooking zone, touch the relevant sensor. Each
time you touch a sensor, an audible tone sounds.
The cooking zones and the timer have to be "active" when
you want to set or adjust a power setting or the duration.
To activate the cooking zone or the timer, touch the
appropriate sensor of the cooking zone or the timer. The
sensor will start to flash on and off after you touched it. While
the sensor is flashing, set or adjust the power setting or the
duration.
Exception:
If there is only one cooking zone in operation, you can set or
adjust the power setting without activating it first.
Take care to keep the control area clean. Do not place
anything on the control area. The sensor switches may fail
to react or they could mistake the article or any dirt for a
fingertip contact, thereby activating a function or even
causing the cooktop to switch off automatically (see Safety
switch-off.)
Never place hot pans on the sensor switches. The
electronic unit underneath could get damaged.