Table of Contents
Advertisement
Problem
The sensor switches
show increased
sensitivity or fail to
react.
FE flashes alternately
with a number in the
timer display.
FE 44
FE 47
FE 48
Other fault messages
FE..
Possible cause
The sensitivity level of
the sensor switches
has changed.
The overheating
protection
mechanism has been
activated.
The fan is blocked or
faulty.
There has been a
fault in the
electronics.
Problem solving guide
Remedy
Make sure that there is no direct
light (from the sun or from an
artificial source) falling onto the
cooktop. The area surrounding
the cooktop must not be too
dark.
Make sure the cooktop or the
sensor switches aren't covered.
Take any pans off the cooktop
and wipe away any food
deposits.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If this does not solve the
problem, please call Miele.
See "Overheating protection".
Check whether the fan is
blocked by an object, e.g. a
fork, and remove the
obstruction.
If the fault message does not
disappear, call Miele.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If the problem persists after
reconnecting the appliance to
the power supply, please
contact Miele.
51
Hide quick links:
Advertisement
Table of Contents
