Table of Contents
Advertisement
Operation
Rapid ignition system
The appliance is supplied with a rapid
ignition system with the following
features:
– The control knob can be released as
soon as the flame has ignited.
– Should the flame be extinguished by
a gust of air, the burner will re-ignite
automatically.
If re-ignition is unsuccessful, the gas
supply will be cut off automatically
(see "Safety cut-off").
Switching on, adjusting the
flame and switching off
The control knob is used to ignite the
burner and regulate the strength of the
flame.
ß The gas supply is turned off
& Strongest flame:
The inner and outer burners operate
at the highest setting
& Strong flame (7 o'clock position):
The outer burner operates at the
lowest setting,
the inner burner at the highest
setting
& Strong flame (5 o'clock position):
The outer burner is switched off,
the inner burner operates at the
highest setting
/ Weakest flame:
The outer burner is switched off,
the inner burner operates at the
lowest setting
16
The burner can only be switched on
by pushing in the control and turning
it anti-clockwise,. It is switched off
by turning the control clockwise. The
outer flame ring can only be
switched on and off by pushing
down on the control and turning it in
the appropriate direction.
The following will cause damage to
the appliance:
-
Switching on the burner without
pushing the control down,
-
Switching the burner on by
turning the control clockwise,
-
Switching the outer flame ring
on or off without pushiong the
control down,
-
Switching the burner off by
turning the control
anti-clockwise.
The manufacturer will not accept
liability for any damaging resulting
from incorrect operation.
Advertisement
Table of Contents
