Installation - Miele KM 6312 Operating And Installation Instructions

Installation

Flush fit cooktops are only suitable
for installation in granite, marble,
tiled or solid wood worktops.
See "Building-in dimensions" to
check which cooktop can be fitted
into a glass worktop.
For all other worktop materials,
consult the manufacturer whether
they can be used with a flush-fit
cooktop.
The unobstructed width of the base
unit needs to be at least as wide as
the inner worktop cut-out (see
"Building-in dimensions) so that the
cooktop is accessible from below
and the lower cabinet can be
removed for maintenance and
servicing purposes.
If the cooktop is not accessible from
below after installation, the seal must
be removed in order for the cooktop
to be taken out.
Flush-fitted cooktops
The cooktop can be installed
– in a suitable cut-out in a granite or
marble worktop.
– in a suitable cut-out in a tiled or solid
wood worktop or glass worktop with
a wooden support frame. Frames
must be provided on site, and are
not supplied with the appliance.
61