Operation; Start-Up - Kodak Ektalite 2000 Operating Manual

Start-up
Operation
Models 2000, 1500, and 1000 only
A
- 'o\
Caution
Before you turn on your new KODAK EKTALITE Slide Projector, it is
critical to set the voltage selector to the proper setting.
The voltage selector is located on the base of the projector. You can set
the voltage selector for the proper voltage (100, 115, 130, 220,230, and
240 V , 50160 Hz) by turning the selector until the arrow of your main
voltage lines up with the rurow on the projector housing.
Fuse storage door
4098_0046ACA
4098_0046AC
KODAK EKTALITE Slide Projectors
47