Operation - Kodak FS-10-N Operation & Maintenance Manual

OPERATION
=
II
YOUR SOUND KODASCOPE
equipment is contained in
two cases-the speoker unit and the Kodascope case.
Locate the speaker unit in a convenient position as close
as possible to the screen. Lift the two latches and swing
the sides open. Remove the
TAKE-UP REEL, PROJECTION LAMP,
and
POWER CORD.
Then turn the speaker opening toward
the audience. The speaker case may be closed or left open.
Place the Kodascope case on a firm table with the front
end flush with the edge. lift the four latches and lower
the two sides of the case.
Several operating positions are possible. The Kodoscope
can be operated from the case as shown below, or
-if additional neightis rrecessaryj'it con be placed upon the
closed case as shown on the opposite page. Slight de-
pressions in the case side indicate the locotion for the
Kodascope feet when it is used in the latter position.