Cleaning The Condenser And Mirror - Kodak Ektalite 2000 Operating Manual

Maintenance
Cleaning the
Disassembling the Lamp Module
Condenser
and Mirror
To clean the condenser or mirror, you must disassemble the lamp
module.
Slide the power switch to OFF and unplug the projector. Allow the
projector to cool about 10 minutes. Push the lamp-module release
button and remove the lamp module.
Use a torx-head screwdriver to remove the screw.
Using a flat-blade screwdriver, apply ample pressure to release each of
the metal tabs.
A098_0037GC
72
KODAK EKTALITE Slide Proiectors