Maintenance; Care - Kodak Ektalite 2000 Operating Manual

l
I
*
l
l
l
l
i
;
l
I
l
Maintenance
Gare
Projector Care
Your projector should be serviced periodically to prolong life. Dirt and
dust can have adverse effects on the lubricants used in the projector and
may cause malfunctions. We recommend routine maintenance every
1500 hours of operation or three years.
To ensure a long life and trouble-free operation for your projector:
. Allow the air to flow freely around the projector
. Do not recirculate warm air.
'
. Keep the projector dust free.
. If your projector is chilled, bring it to room temperature before
operating.
l
L_
I
I
Lamp Tips
L
Follow these tips to increase lamp life:
. Unplug the projector and allow it to cool before changing the lamp.
. The NO LIGHT position will cool a blown lamp much faster.
. Allow for unrestricted flow of air to the exhaust vent.
. Using voltages above the nominal switch setting greatly reduces
lamp life.
. Gently wipe off any fingerprints with a soft cloth moistened with
rubbing alcohol.
. Avoid jarring the projector when the lamp is warm and in use.