Changing The Projection Lamp - Kodak Ektalite 2000 Operating Manual
Ektalite series slide projector
Hide thumbs
Also See for Ektalite 2000:
- Quick reference manual (27 pages) ,
- Service manual (96 pages) ,
- Instruction manual (50 pages)
Table of Contents
Advertisement
Maintenance
Changing the
Projection
Lamp
Slide the power switch to OFF and unplug the projector.
Allow the projector and lamp to cool for about 10 minutes. Push the
lamp module release button and remove the lamp module. You can
replace it with a new lamp module or replace only the lamp.
Note: There is an additional safety latch, which reduces the chance of
an accident with a loosely inserted lamp module, that may cause some
resistance. To release the latch, you may need to apply extra effort when
you pull out the module.
4098 0062AC
70
KODAK EKTALITE Slide Projectors
- Quick Links:
- Changing the Projection Lamp
Hide quick links:
Advertisement
Table of Contents
