Installation; Setting Up - Geemarc PhotoPHONE 100 Manual

Now available to purchase from www.M2Cshop.com

Setting Up

Connect the handset to one end of the curly cord. Plug the other
end of the curly cord into the jack on the left hand side of the
PHOTOPHONE 100 unit. Place the handset on the cradle.
Connect the line cord to the jack located at rear of telephone then
connect the plug at the other end of the line cord into the wall
socket *.
(*) Classified TNV-3 according to EN60950 standard
Now available to purchase from www.M2Cshop.com

INSTALLATION

7