Setting Up The Scanner For Cerner Millennium Applications; Setting Up The Scanner For Cerner Classic Applications - Metrologic MS1633 FocusBT Installation Manual

Setting up the Scanner for Cerner Millennium Applications

Note: If you are not running Cerner Millennium applications skip this section.
Scan the following barcodes to sets up the scanners suffix to a "
Cerner Millennium applications. If this does not work for your application try scanning the
configuration barcodes for Cerner Classic.

Setting up the Scanner for Cerner Classic Applications

Note: If you are not running Cerner Classic applications skip this section.
Scan the following barcodes to set up the scanners suffix to a "
Classic applications.
Please proceed to the section titled "Symbology Selection"
34 MS1633 Focus BT Scanner Installation Guide
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
Disable CR Suffix
³ 1 1 6 6 0 3
Enable TAB Suffix
³ 1 1 6 6 1 0
Disable TAB Suffix
³ 1 1 6 6 0 0
Enable CR Suffix
³ 1 1 6 6 1 3
Horizontal TAB
" for most
Carriage Return
" for Cerner