Ms1633 Focusbt Connection Setup - Metrologic MS1633 FocusBT Installation Manual

MS1633 FocusBT Connection Setup

Power up
13) the FocusBT scanner and allow it to boot completely. Three beeps will
indicate the scanner is completely booted.
14) To establish a connection with the MS1633 FocusBT scanner click the "
tab and then click the "
FocusBT
15) Select the
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
Discover
" Button.
scanner from the list and click the
MS1633 Focus BT Scanner Installation Guide
Connections
Connect .
Button
"
31