Cable Removal; Cable Connection Warning - Metrologic MS5100 Installation And User Manual

I
NTRODUCTION

Cable Removal

Disconnect the power supply from the PowerLink cable and turn off power to the
host system before removing the cable from the scanner.
1. Locate the small 'pin-hole' beneath
the Eclipse logo on the front side of
the scanner near the end of the
handle.
2. Bend an ordinary paperclip into the
shape shown.
3. Insert the paperclip (or other small
metallic pin) into the small 'pin-hole'.
There will be a faint 'click' when the
connector's lock releases.
4. Pull gently on the cable's strain-relief
to remove the cable.

Cable Connection Warning

Important: If the PowerLink cable is not fully latched the unit can power
6
intermittently.
Figure 4.
Figure 3.
Figure 5.