Configuration - KVH Industries V7 User Manual

3. Configuration

This chapter explains how to change the brightness of the control unit's
display, set up an RF radiation hazard zone, and reset the system to its
factory configuration. It also explains how to configure your computer
for a wired Ethernet connection to the TracPhone V7 system. For details
on setting up a wireless network, refer to the instructions provided with
your wireless access point (purchased separately).
Contents
Adjusting the Control Unit Display Brightness................. 23
Configuring RF Radiation Hazard Zones .......................... 25
Resetting the System to Factory Conditions.................... 33
Configuring Your Computer for mini-VSAT Broadband.... 35
Requesting Static IP Addressing ..................................... 43
TracPhone V7 User's Guide
Chapter 3 - Configuration
21