3. Press
CHANGE until the display shows "CAL
GYRO= YES."
CAL GYRO= YES?
CHANGE
4. Press
ACCEPT to start gyro calibration.
DO NOT MOVE VESSEL
DURING CALIBRATION
CALIBRATING GYROS
AZ:
EL:
5. Verify that the azimuth (AZ), elevation (EL), and skew
gyros all pass ("P"). If any gyro fails ("F"), retry the
calibration. If it continues to fail, please seek technical
support (see
"Technical Support" on page
CALIBRATING GYROS
AZ:P
EL:P
6. Once the gyros are calibrated, the antenna restarts. Wait
five minutes for system startup.
TracPhone V7 User's Guide
Chapter 4 - Troubleshooting
ACCEPT
SKEW:
72).
SKEW:P
71