Configuring Tracvision Sa For Remote Satellite Dish Operation; Remote Dish Wiring Configuration; Figure - KVH Industries 5616 Owner's Manual

KVH TracVision LM
Remote Dish Wiring
Configuration
2-16
2.7
In some campground locations, dense foliage will block the
satellite signal. In these situations, a remote portable antenna
may be the only solution to satellite signal reception.
The wiring option for the remote dish is very simple and
should be installed when the TracVision is installed. A high-
quality "A/B switch" should be used to change from TracVision
to remote antenna operation. The recommended wiring
arrangement for remote dish operation is illustrated in

Figure 2-24.

Figure 2-24
Configuring TracVision SA for
Remote Satellite Dish Operation
TV Out
IRD
SAT in
RF Cable
Common
A
A/B Switch
A B
Antenna
RF Cable
RF Cable
B
Remote Dish