Xerox Phaser 4500 Service Manual page 387

1.
Remove the two screws (gold tapping, 8 mm) that attach the Grounding Plate to
the frame.
2. Remove the Grounding Plate.
3. Lift up the Left Cover Plate just above the boss of the 550 Left Cover Frame a
little to release it.
4.
Shift the Left Cover Plate in the direction of the arrow to release the 4 hooks of
the 550 Left Cover Frame, and remove the Left Cover Plate from the optional
550-Sheet Paper Feeder.
Replacement Notes:
When installing the Grounding Plate, be sure to install the tip of the
Grounding Plate under the Left Cover Plate.
Ensure all four hooks on the Left Cover Plate are properly engaged by
pressing down on each while sliding it toward the front.
8-98 Phaser 4500 Service Manual