Altitude; Timer - Suunto X6HR Instruction Manual

3.6.3. Altitude

With this function you can set the reference altitude. For more information about the
reference altitude, refer to page 33.
To set the reference altitude
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Altitude with the arrow buttons and press Suunto.
3. With the arrow buttons, set the reference altitude in the field to match the altitude of
you current location and press Suunto. You return to the function menu.

3.6.4. Timer

You can activate the timer to sound a signal after set periods. It can be used, for
example, for interval training. Two different intervals, Int1 and Int2, can be set.
The timer is synchronized with the stopwatch, and if turned on, it signals when the
stopwatch is running. If two intervals have been set, they will signal consecutively,
interval 1 with one long beep and interval 2 with two shorter beeps.
NOTE: You do not have to acknowledge the signal in any way when you hear it.
Activating timer
To activate the timer
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Timer with the arrow buttons and press Suunto.
The On/Off selection is activated.
3. Set the timer on with the arrow buttons and press Suunto. A long press of the
Suunto button brings you back to the main window if the interval is already correct.
A short press activates the Int1 minutes field.
50