Use - Suunto X6HR Instruction Manual

the oldest memory file to be erased. Erase the suggested file by pressing Suunto or
select and erase another file. After the deletion, you can start the chrono. For more
information about erasing memory files, refer to page 56.
Time/Heart Rate
The third row displays the heart rate.
If the heart rate monitor is not active, the third row displays the running time of the
current lap. When you enter the Chrono mode, the third row displays the time. If,
however, X6 receives a heart rate signal, the third row automatically switches to
HR
showing heart rate. If the reception of the heart rate signal is discontinued, "—-"
appears on the third row. If the signal is not received within 5 minutes, the third row
starts showing time again. To reactivate the heart rate display, switch to another
mode and then return back to Chrono mode.

3.6.2. Use

With the Use function you can define whether the air pressure measurement is used
to represent the altitude or the weather conditions. When the Chrono is on, it is
advisable to activate the Alti use. For more information, refer to page 32.
To select either Altimeter use or Barometer use
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Use with the arrow buttons and press Suunto.
The alti/baro field is activated.
3. Change the content of the field with the arrow buttons and press Suunto. You
return to the function menu.
49