Table of Contents
Advertisement
3.6.6. Memory
The Memory function of X6
watch is active. Heart rate data is recorded only when the transmitter belt is active.
The same memory file contains both altitude and heart rate data, but the data is
viewed separately with View Alti and View HR. You can view the data simultane-
ously with the PC software. If the transmitter belt was not active when the recording
began, no heart rate data is viewable in the memory file.
Viewing Heart Rate memory
The memory file can be viewed in relation to heart rate data.
To view a memory file, follow these steps:
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Memory with the arrow buttons and press Suunto.
The memory menu is displayed with View HR in reversed color.
3. Press Suunto. The list of memory files is displayed. The files in the file list are
organized so that the latest file is shown first.
4. Scroll to the file you want to view with the arrow buttons and press Suunto. If the
file does not contain heart rate data, the message "
return to the file list.
5. Scroll the information with the arrow buttons. The information is displayed in the
following order:
• The total duration of the file and the number of laps in the file.
• Average heart rate.
• Maximum and minimum heart rates.
• Heart rate over the High limit. Shows the heart rate and time in minutes and
seconds.
records time and altitude data always when the stop-
HR
" is displayed and you
NO HR DATA
53
Advertisement
Table of Contents
