Table of Contents
Advertisement
memory becomes full while the recording is on, Suunto X6
profile. However, the stopwatch remains running and the summary values are updated.
Erasing memory files
If the memory is full, you cannot start the timing until you have deleted at least one
memory file.
To delete a memory file
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Memory with the arrow buttons and press Suunto.
The memory menu is displayed.
3. Scroll to Erase and press Suunto. The list of memory files is displayed. The files in
the file list are organized so that the latest file is shown first.
4. Scroll to the file you want to erase with the arrow buttons and press Suunto.
5. Scroll to Erase and press Suunto to erase the file. You return to the function menu.
NOTE: If you try to erase a file when the file list is empty, the message "
" is displayed and you return to the function menu.
MEMORY
To quit Erase at any point, press Stop/CL to return to the function menu.
Setting the recording interval
The recording interval defines how often the information is saved to the memory
when the timing is running. The recording interval is either 2, 10 or 60 seconds. If you
change the interval while the stopwatch is running, the change does not affect the
current recording. The change applies to the next stopwatch recording.
To set the interval
1. To access the function menu, press Suunto in the main display.
56
stops recording the
HR
NO FILES IN
Advertisement
Table of Contents
