Other Faults - Miele PT 7136 Plus User Manual

Other faults

What if ...
The program
runs too long or
stops.
The laundry is
not dry enough.
Possible fault
In some cases "Clean out airways" is displayed. See "Clean
out airways". Open and close the dryer door.
The air supply is
insufficient.
The lint filter is clogged
with lint.
The exhaust hose or the
connection is clogged with
lint.
The laundry was not spun
sufficiently in the washer.
The dryer is over-loaded.
Metallic zippers prevent a
correct measurement of
the laundry's residual
moistness.
The load contained too
many dissimilar items (size
and fabrics.)
Frequently asked questions
Fix
Open a window or door to
increase air flow.
Remove the lint.
– Check regularly on the
exhaust parts (e.g. wall vent
duct, louvered wall vent,
bends, etc.) for air
permeability.
– Remove the lint.
Spin laundry thoroughly before
drying.
Regard the maximum load size
per program.
– Open the zippers of the
laundry before drying.
If the problem persists, dry the
items with long zippers only in
the "Warm air" program.
– Continue drying on the "Warm
air" program.
– See the "Program Guide" for
suitable programs.
27