Miele PT 7136 Plus User Manual page 26

Frequently asked questions
What if
At the end of a
program
Clean filter.
Clean the lint
filter.
Clean out airways
Program finish
time changed
26
Possible cause
The dryer reminds you to
clean the lint filter.
The cycle of the "Clean
filter" message can be
adjusted.
The dryer does not work
at its optimum or not
efficiently.
Possible cause clogging
by lint or detergent
residues.
The exhaust duct maybe
very long. This is not a
fault.
This is not a fault.
Fix
– Remove and clean the lint filter.
To delete this message:
– Confirm with "OK".
– See "Settings - Supervisor level
- Cleaning the lint filters".
– Check all possibilities as
described under "The program
runs too long or stops".
To delete this message:
– Confirm with "OK".
With a long exhaust duct, program
times and energy consumption
increase.
The cycle of the "Clean out
airways" message can be
adjusted.
– See "Settings - Supervisor level
- Cleaning the airways".
While the timer was counting
down, the settings were changed
or there was a power failure.