Other Faults - Miele PT 7136 Operating And Installation Manual

Frequently asked questions

Other faults

What if ...
The program
runs too long or
stops.
The laundry is
not dry enough.
28
Possible fault
In some cases "Clean out airways" is displayed. See
"Settings - Supervisor level - Clean the airways". Open and
close the dryer door.
The air supply is
insufficient.
The lint filter is clogged
with lint.
The exhaust hose or the
connection is clogged with
lint.
The laundry was not spun
sufficiently in the washer.
The dryer has over-loaded. Regard the maximum load size
Metallic zippers prevent a
correct measurement of
the laundry's residual
moisture.
The load contained too
many dissimilar items (size
and fabrics.)
Solution
Open a window or door to
increase the air flow.
Remove the lint.
– Check the exhaust parts
regularly (e.g. wall vent duct,
louvered wall vent, bends,
etc.) for air permeability.
– Remove the lint.
Spin laundry thoroughly before
drying.
per program.
– Open the zippers of the
laundry before drying.
If the problem persists, dry
items with long zippers using
the "Warm air" program.
– Continue drying using the
"Warm air" program.
– See the "Program Guide" for
suitable programs.