Other Faults - Miele NOVOTRONIC T 7634 Operating Instructions Manual

Vented dryer
Table of Contents

Advertisement

Other faults

Problem
The drying
process goes on
too long or even
switches off.
Even after the lint
screen is cleaned,
the Filter/Vent
indicator come
on.
The laundry was
not satisfactorily
dried.
Cause
Please check all possible causes and switch the dryer
off and then on again.
Insufficient ventilation,
perhaps because the
installation space is too
small.
The door lint filter is blocked
with lint.
The vent ducting or its outlet
is blocked with lint.
Clothes were insufficiently
spin-dried.
The dryer is overloaded.
Metal components such as
zippers have prevented the
moisture level of the laundry
from being determined
accurately.
The load consisted of various
fabrics.
Trouble shooting
Solution
Open a door or window and
let in increased air flow.
Remove the lint.
– Check all components of
the venting (such as the
wall pipe, external grill,
elbows and bends, etc.)
for unimpeded air flow.
– Remove the lint.
In future, spin textiles in the
washer at a higher rpm.
Verify the maximum load for
each drying program.
– In future, open the zippers.
If the problem recurs, in
future dry garments with long
zippers using the Timed
warm program.
– Re-dry with Timed warm.
– Next time, select a suitable
program.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T 7634

Table of Contents