Installing The Integrated Storage Controller Card - Dell Precision Rack 7910 Owner's Manual

Figure 33. Removing and installing the integrated storage controller card
1. integrated storage controller cable
3. integrated storage-controller card
connector on the system board
1. Replace the expansion-card riser 1.
2. Replace the cooling shroud.
3. Follow the procedure listed in

Installing the integrated storage controller card

1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
4. Remove the expansion-card riser 1.
5. Keep the #2 Phillips screwdriver handy.
After working inside your
Safety instructions.
Before working inside your
2. integrated storage controller card
4. integrated storage controller card
holder
system.
system.
71