Removing The Cooling Shroud; Installing The Cooling Shroud - Dell Precision Rack 7910 Owner's Manual

Removing the cooling shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. If installed, remove the full-length PCIe cards.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
Hold the shroud and lift it away from the system.
Figure 7. Removing and installing the cooling shroud
1. cooling shroud
1. Replace the cooling shroud. See
2. Follow the procedure listed in

Installing the cooling shroud

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Align the tabs on the cooling shroud with the securing slots on the chassis.
3. Lower the cooling shroud into the chassis until it is firmly seated.
Safety instructions.
Before working inside your
Installing the cooling shroud
After working inside your
Safety instructions.
system.
2. touch point (2)
system.
23