Removing The Cooling-Fan Assembly - Dell Precision Rack 7910 Owner's Manual

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: Your system supports six hot-swappable cooling fans.
1. Align the plug at the base of the cooling fan with the connector on the system board.
2. Slide the cooling fan into the securing slots until the tabs lock into place.
Follow the procedure listed in
To see a video on how to remove & install a fan or the fan assembly, scan this QR code, or click here:
http://www.Dell.com/QRL/Workstation/R7910/Fans

Removing the cooling-fan assembly

1. Ensure that you read the
2. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Unlock the cooling-fan assembly from the chassis by lifting the release levers upward.
2. Lift the cooling-fan assembly out of the chassis.
42
After working inside your
Safety instructions.
Before working inside your
system.
system.