Internal Dual Sd Module; Removing An Internal Sd Card - Dell Precision Rack 7910 Owner's Manual

Figure 31. Removing and installing the SD vFlash media card
1. SD vFlash media card
3. To install an SD vFlash media card, with the label side facing up, insert the contact-pin end of the SD
vFlash media card into the card slot on the module.
NOTE: The slot is keyed to ensure correct insertion of the card.
4. Press the card inward to lock it into the slot.

Internal dual SD module

NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of the
System Setup, the information is replicated from one SD card to another.

Removing an internal SD card

1. Ensure that you read the
2. Follow the procedure listed in
3. Locate the SD card slot on the internal dual SD module and press the card to release it from the slot.
4. Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
To see a video on how to remove & install the internal dual SD module and SD cards, scan this QR code,
or click here: http://www.Dell.com/QRL/Workstation/R7910/IDSM
66
Safety instructions.
Before working inside your
After working inside your system
2. SD vFlash media-card slot
system.