Cabinet And Top Cover - Maytag 111990" Automatic Dryers Service Manual

CABINET AND TOP COVER
CONSOLE
1. Remove control panel assembly.
2. Remove eight screws, two on each
side and four across the front,
holding console to top cover.
TOP COVER
1. Remove front panel.
~
2. Remove two screws (one in each
front corner) which hold top cover to
cabinet.
3. Remove main wire harness wiring
from components on control panel.
FRONT
CABeNET
PANEL
I
4. Remove control panel assembly.
I
5. Pull main wire harness through
I
I
opening in top cover.
6. Remove console.
7. Push top cover back to disengage
from cabinet and remove top cover.
CABINET REMOVAL
1. Remove front panel.
2. Remove top cover assembly.
3. Remove tumbler.
4. Remove tumbler rear.
5. Remove six screws (three on each
side) holding cabinet to base frame.
Remove screws at front corners and
across back. Remove cabinet.
ED/GD401 1090 SECTION 3. SERVICE PROCEDURES
3-41