TUMBLER AND RELATED COMPONENTS
TUMBLER
REAR
OUTLET
~
FRONT
BEARING
~~~
/
~
AND PAD
SENSOR
INTERIOR LIGHT
(120V - 7 Watt)
The drum light is at the upper center of
the tumbler opening. It is wired in
series with the door switch so that the
light comes on, illuminating the drum,
only when the door is open.
L~GHT REPLACEMENT
1. Open door.
2. Unscrew bulb.
ED/GD401 1090
LIGHT RECEPTACLE
1. Remove screws from Front Panel
and swing panel aside.
2. Remove wires.
3. Remove nut from left hand mounting
tab.
4. Pull up on receptacle to disengage
from tumbler front.
SECTION 3. SERVICE PROCEDURES
3-17