Removing The Door Assembly; Removing The Console/Hmi And Top Panel - Maytag MGD6500MBK Technical Manual

REMOVING THE DOOR ASSEMBLY

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Use a Phillips driver to remove the two upper and lower hinge screws.
2. Remove dryer door.
32
FOR SERVICE TECHNICIAN'S USE ONLY
REMOVING THE CONSOLE/HMI AND TOP
PANEL
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
To Remove the Console
1. Unplug dryer or disconnect power.
2. Remove the six 1/4" (6 mm) hex-head screws from top rear panel as
shown below and set panel aside.
3. Slide thin plastic putty knife between the console assembly and top panel.
Use your free hand to push back on the top of the console.