Table of Contents
Advertisement
character, then press → to move the cursor to the next character and re-
peat until the name is correct, then press
3. If you don't want to spell out the name, you can jump directly to the
box by pressing
F
I
L
IND
N
IST
press
and the waypoint information screen appears with the
ENT
command selected.
4. To begin navigating to the waypoint, press
Navigate a Trail
1. Press
|
MENU
pears.
2. Press ↓ to saved trail list, then use ↓ or ↑ to select a trail to navigate.
3. With the trail name highlighted, press
4. Wait while the iFINDER creates a route from the trail.
When the progress message disappears, the unit displays a trail infor-
mation screen, with
box.
Tip: Back Track a Trail
Running the Navigate command will lead you along the trail from
its starting point to its ending point. You can also back track a trail,
following it in reverse. In Easy Mode, this is done automatically
with the most recently created active trail. In Advanced Mode, you
must select the Reverse command to reverse the trail point order
before you start navigating. From the Edit Route menu, press → to
R
R
EVERSE
OUTE
5. To follow the trail, press
data along the trail. Follow the steering arrow on the Map Page or the
compass bearing arrow on the Navigation Page.
www.Busse-Yachtshop.de
. Use ↑ or ↓ to select the waypoint name,
ENT
|↓ to
MENU
M
Y
Trails Menu, Advanced Mode.
N
AVIGATE
|
|← to
ENT
N
AVIGATE
ENT
to jump to the list below.
ENT
ENT
|
and the following screen ap-
T
ENT
RAILS
|↓ → to
ENT
highlighted in the top command
R
OUTE
.
R
OUTE
. The unit begins showing navigation
53
email: info@busse-yachtshop.de
.
|
N
ENT
AVIGATE
G
T
O
O
.
Advertisement
Table of Contents
