Department Group Projection; Hourly Report - Sharp UP-3500 Instruction Manual

I I I I I Department group projection
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [1 REPORTS] button to display the
detail menu. Then touch the [3 DEPT GR. PROJECTION] button to program the group projection.
(3) Touch the required programming item, and enter each group number and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
DEPT GR. No.#1
DEPT GR. No.#2
:
:
DEPT GR. No.#25
I I I I I Hourly report
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [1 REPORTS] button to display the
detail menu. Then touch the [4 HOURLY REPORT] button to program for the hourly report.
(3) Touch the required programming item, and select or enter each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
MEMORY TYPE
STARTING TIME
START TIME AM/PM
• This setting effect both setting to HOURLY, LABOR COST% REPORT.
• This setting effect only starting time to SERVICE TIME REPORT.
154
➝
(7 TERMINAL
Parameter
2 digits (1 to 99/0) Dept group no. : (0: undefined)
2 digits (1 to 99/0) Dept group no. : (0: undefined)
2 digits (1 to 99/0) Dept group no. : (0: undefined)
➝
(7 TERMINAL 1 REPORTS
Parameter
15MIN/30MIN/60MIN
2 digits (1 to 12)
AM/PM
➝
1 REPORTS 3 DEPT GR. PROJECTION .......... PGM2)
:
:
➝
4 HOURLY REPORT .......... PGM2)
Classification
Dept group #1
Dept group #2
:
:
Dept group #25
Classification
Memory type
Starting time
Starting time AM/PM
www.cashregisters.net